• The Hall voltage is a product of the Hall effect
• Hall voltage is defined as:

The potential difference produced across an electrical conductor when an external magnetic field is applied perpendicular to the current through the conductor

• When an external?magnetic field?is applied perpendicular to the direction of current through a conductor, the electrons experience a?magnetic force
• This makes them drift to one side of the conductor, where they all gather and becomes more negatively charged
• This leaves the opposite side deficient of electrons, or positively charged
• There is now a potential difference across the conductor
  • This is called the Hall Voltage,?V_H

The positive and negative charges drift to opposite ends of the conductor producing a hall voltage when a magnetic field is applied

• An equation for the Hall voltage?V_H?is derived from the electric and magnetic forces on the charges

The electric and magnetic forces on the electrons are equal and opposite

• The voltage arises from the electrons accumulating on one side of the conductor slice
• As a result, an electric field is set up between the two opposite sides
• The two sides can be treated like oppositely charged parallel plates, where the electric field strength?E?is equal to:

• Where:
  • V_H?= Hall voltage (V)
  • d = width of the conductor slice (m)
• A single electron has a drift velocity of?v?within the conductor. The magnetic field is into the plane of the page, therefore the electron has a magnetic force F_B?to the right:

F_B?= Bqv

• This is equal to the electric force F_E?to the left:

F_E?= qE

qE = Bqv

• Substituting E and cancelling the charge q

• Recall that current?I?is related to the drift velocity?v?by the equation:

I = nAvq

• Where:
  • A = cross-sectional area of the conductor (m²)
  • n = number density of electrons (m^-3)
• Rearranging this for?v?and substituting it into the equation gives:

• The cross-sectional area?A?of the slice is the product of the width?d?and thickness?t:

A = dt

• Substituting?A?and rearranging for the Hall voltage?V_H?leads to the equation:

• Where:
  • B = magnetic flux density (T)
  • q = charge of the electron (C)
  • I = current (A)
  • n = number density of electrons (m^-3)
  • t = thickness of the conductor (m)

• This equation shows that the smaller the electron density n of a material, the larger the magnitude of the Hall voltage
  • This is why a semiconducting material is often used for a Hall probe
• Note:?if the electrons were placed by positive charge carriers, the negative and positive charges would still deflect in opposite directions
  • This means there would be no change in the polarity (direction) of the Hall voltage