• Similar to a coil or a solenoid, a straight conducting rod moving through a magnetic field will also have an e.m.f induced in it
• This is only when the conductor moves?perpendicular?to the magnetic field lines where it cuts through the magnetic flux lines

Conducting rod moving perpendicular to a magnetic field directed into the page

• The conducting rod has a length?L?and moves through a uniform magnetic field with flux density?B?at a constant velocity v
• The distance travelled by the conductor is:

s?=?vΔt

• Where:
  • s =?distance travelled (m)
  • v?= velocity (m s-1)
  • Δt?= time interval (s)

   

• Therefore, the area?A?of the?magnetic flux?that it cuts through is:

A?=?LvΔt

• The total flux the conductor cuts through is:

ΔΦ =?BA?=?BLvΔt

• Faraday's law gives the e.m.f induced:

• Where for the conductor,?N?= 1
• Substituting the change in magnetic flux ΔΦ into the e.m.f equation:

• Therefore, the induced e.m.f in the conductor as it moves through the magnetic field is:

ε =?BLv

• This equation shows that the e.m.f induced increases if:
  • A?longer?conductor is in the field
  • The magnetic field?strength?is larger
  • The conductor cuts through the field lines?faster

   

Step 1: Write down the known quantities

• • Length,?L?= 34.5 m
  • Velocity,?v?= 253 m s-1
  • Magnetic field strength,?B?= 0.06 mT = 0.06 × 10-3?T

   

Step 2: Write down the e.m.f equation

ε =?BLv

Step 3: Substitute in the values

ε = (0.06 × 10-3) × 34.5 × 253 = 0.52371 =?0.52 V

• When a coil rotates in a uniform magnetic field, the flux through the coil will vary as it rotates
• Since e.m.f is the rate of change of?flux linkage, this means the e.m.f will also change as it rotates
  • The maximum e.m.f is when the coil?cuts through?the most field lines
  • The e.m.f induced is an?alternating?voltage

   

The maximum e.m.f is when the coil cuts through the field lines when they are parallel to the plane of the coil

• This means that the e.m.f is:
  • Maximum?when?θ = 90o. The magnetic field lines are parallel to the plane of the area?(or?the normal to the area is perpendicular to the field lines)
  • 0?when?θ = 0o. The magnetic fields lines are perpendicular to the plane of the area (or?the normal to the area is parallel to the field lines)

   

• Note that this is the?opposite?of the maximum and minimum flux through the coil

The e.m.f and flux linkage are 90° out of phase

• The flux linkage can also be written as:

NΦ = BAN cos(ωt)

• Where the angle θ depends on the angular speed of the coil, ω:

θ = ωt

• The induced e.m.f, ε from Faraday's Law depends on the?rate of change?of flux linkage, which means it can also be written as:

ε =?BANω sin(ωt)

• Where:
  • ε = e.m.f induced in the coil (V)
  • B?=?magnetic flux density?(T)
  • A?= cross-sectional area of the coil (m2)
  • ω = angular speed of the coil (rad s-1)
  • t?= time (s)

   

• The equation shows that the e.m.f varies?sinusoidally?and it is 90°?out of phase with the flux linkage

Step 1: Write the known quantities

• • Number of turns,?N?= 40
  • Area,?A?= 0.5 m2
  • Angular velocity, ω = 42 rad s-1
  • Magnetic flux density,?B?= 3.15 mT = 3.15 × 10-3?T

   

Step 2: Write down the e.m.f equation

ε =?BANω?sin(ωt)

Step 3: Determine when the maximum e.m.f will be

• • The maximum e.m.f occurs when sin(ωt) = ±1, or when the coil is parallel to the magnetic field

Step 4: Substitute in the values

ε = (3.15 × 10-3) × 0.5 × 40 × 42 × ±1 =?± 2.6 V