Home » 國際課程 » A-level課程 » Details

AQA A Level Physics復習筆記4.6.2 Area Under a Force-Displacement Graph

Category: A-level課程, 教材筆記, 福利干貨 Date: 2022年7月7日下午5:11

Area Under a Force-Displacement Graph

The work done can also be found from a force-displacement graph
If the force is not constant and is plotted against the displacement of the object:
- The work done is equal to?the area under the force-displacement graph
This is because:

Work done = Force × Displacement

The work done is therefore equivalent whether there is:
- A?small force?over a?long displacement
- A?large force?over a?small displacement
The graph may need to be split up into sections. The total area is the sum of the areas of each section

4.6.2-Work-Done-on-Graph

The area underneath the force-displacement graph is the work done

Worked Example

The graph shows how a force varies over a displacement of 80 m. Force-Displacement-Graph-Worked-Example Calculate the work done.

Step 1: Split the graph into sections

The work done is the area under the graph

The total area can be found by splitting the graph into sections A and B

Force-Displacement-Graph-Worked-Example-2

Step 2: Calculate the area of section A

Section A is a right-angled triangle where the area is 0.5 × base × height

0.5 × 80 × (250 – 100) = 6000 J

Step 3: Calculate the area of section B

Section B is a rectangle where the area is base × height

80 × 100 = 8000 J

Step 4: Calculate the total work done

The total work done is the sum of both areas

Work done = 6000 + 8000 = 14 000 J

Exam Tip

Always check the units on the axes when calculating values from a graph. Sometimes the force will be given in kN or the displacement in km. These must be converted into SI units to calculate the work done in J.

Variable Forces

The force on an object may not always be constant, this is known as a?variable force
This is more representative of a force in real life
If a force?is?constant, then the following equations can be used:

W?=?Fs

P?=?Fv

If a force is?varying, the above equations?cannot?be used, instead, work done must be found from the area under the force-displacement graph
If a varying force increases, then an object’s acceleration increases and vice versa

Worked Example

A person is pulling a suitcase through an airport with a rough surface.They apply a force of 150 N over a distance of 12 m. Afterwards, the person gets progressively tired and the applied force is linearly reduced to 60 N. The total distance through which the suitcase has moved is 25 m.Calculate the work done by the force applied by the person over 25 m.

Step 1: Sketch a force-displacement graph and split it into sections

4.6.1-Variable-Forces-Worked-Example-2

Step 2: Split the graph into sections

- The work done is the area under the graph
- The total area can be found by splitting the graph into sections A and B

4.6.1-Variable-Forces-Worked-Example

Step 3: Calculate the area of section A

- Section A is a rectangle where the area is base × height
12 × 150 = 1800 J

Step 4: Calculate the area of section B

- Section B is a trapezium where the area is

Step 5: Calculate the total work done

- The total work done is the sum of both areas
Work done = 1800 + 1365 = 3165 J

Exam Tip

When?sketching?graphs, they don’t have to be to scale. However, it is important to label the key points on the x and y-axis from the question to calculate the areas underneath the graph.

轉載自savemyexams

以上就是關于【AQA A Level Physics復習筆記4.6.2 Area Under a Force-Displacement Graph】的解答，如需了解學校/賽事/課程動態，可至翰林教育官網獲取更多信息。

全網破防！ALevel CIE數學M1疑似錯題？經濟P2難度飆升？5月6日大考考情分析必看！