Equipment List

• Resolution?of measuring equipment:
  • Trundle wheel = 0.01 m
  • Tape measure = 0.1 cm
  • Stopwatch = 0.01 s

   

Experiment 1: Measuring the Speed of Sound Between Two Points

• The aim of this experiment is to measure the speed of sound in air between two points

Variables

• Independent variable?= Distance
• Dependent variable?= Time
• Control variables:
  • Same location to carry out the experiment

   

Method

Measuring the speed of sound directly between two points

1. Use the trundle wheel to measure a distance of 100 m between two people
2. One of the people should have two wooden blocks, which they will bang together above their head to generate sound waves
3. The second person should have a stopwatch which they start when they see the first person banging the blocks together and stop when they hear the sound
4. This should be repeated several times and an average taken for the time travelled by the sound waves
5. Repeat this experiment for various distances, e.g. 120 m, 140 m, 160 m, 180 m

• A possible results table might look like this:

Analysis of Results

• The speed of sound can be calculated using the equation:

• The speed of sound in air should work out to be about 340 m/s

Experiment 2: Measuring the Speed of Sound with Oscilloscopes

• The aim of this experiment is to measure the speed of sound in air between two points using an oscilloscope

Variables

• Independent variable?= Distance
• Dependent variable?= Time
• Control variables:
  • Same location to carry out the experiment
  • Same set of microphones for each trial

   

Method

Measuring the speed of sound using an oscilloscope

1. Connect two microphones to an oscilloscope
2. Place them about 2 m apart using a tape measure to measure the distance between them
3. Set up the oscilloscope so that it triggers when the first microphone detects a sound, and adjust the time base so that the sound arriving at both microphones can be seen on the screen
4. Make a large clap using the two wooden blocks next to the first microphone
5. Use the oscilloscope to determine the time at which the clap reaches each microphone and the time difference between them
6. Repeat this experiment for several distances, e.g. 2 m, 2.5 m, 3 m, 3.5 m

• A possible results table might look like this:

Analysis of Results

• The speed of sound can be calculated using the equation:

• The speed of sound in air should work out to be about 340 m/s

Evaluating the Experiments

Systematic Errors:

• In Experiment 2, ensure the scale of the time base is accounted for correctly
  • The scale is likely to be small (e.g. milliseconds) so ensure this is taken into account when calculating speed

   

Random errors:

• A main cause of error in Experiment 1 is the measurement of time
  • Ensure to take repeat readings when timing intervals and calculate an average to keep this error to a minimum
  • Maximise the distance between the two people where possible. This will reduce the error in measurements of time because the time taken by the sound waves to travel will be greater